Decopatched Valentines Gifts Made With Mod Podge

20130206-005216.jpg

As some of you who visit the blog may have already guessed, this girl loves hearts, and what with it coming up to valentines day, its the perfect excuse to get crafty with hearts. Today I’ve decided to make some pretty sweetie jars with matching heart magnets.

The Jar is one I’ve had ready to decorate for some time. I brought a few of them on a bric a brac stall at a bootfair last year.

The hearts are made of paper mâché and already have the magnets attached. They are of a good size and once papered, look amazing on the fridge or a magnetic notice board. These can be brought from Hobbycraft and are available both in store and online.

So for this project I used 2 large heart magnets and 1 jar. (Pairing a jar with a magnet to make a gift set)

Both the gift set and Individual magnet have been decorated differently but were both extremely simple to create.

20130206-005127.jpg

The first Tutorial is for my Retro Heart Magnet and Jar Gift Set.

You will need…

Medium size jar (the type with a glass stopper lid)

Large sized paper mâché heart magnet (Hobbycraft)

Funky heart Decopatch paper (Hobbycraft)

Ultra fine baby blue glitter

Mod podge (Gloss)

Thick – Satin blue ribbon (Baker Ross)

Bright red ribbon (Thin)

Dark red ribbon (medium thickness)

1 Red & 1 blue self adhesive button (baker Ross)

White acrylic Paint

Sweets or other items to fill jar

Tools…

Craft Knife
Scissors
3 Paint brushes (painting, mod podge, glitter)
Small sponge (to wipe excess mod podge)
Ruler
Pencil

First the heart magnet….

1) Give your heart magnet 2 coats of white acrylic paint as abase. Allow to dry in between coats and be careful not to get any paint on the actual magnet as it may affect how magnetic it is.

2) Take a sheet of your Decopatch paper (comes in a packet of three) and cut in half using a craft knife and ruler fir support. Place one piece aside for your jar. Now with a craft knife and ruler cut paper into squares so that you can easily piece them back together like a jigsaw.

3) With Mod Podge or Decopatch glossy glue get Decopatching. I’ve explain the art of using Decopatch to decorate almost any object or surface in numerous post here before. So, without going into to much detail I’ll explain in brief… Basically cover the heart in mod podge, lay the paper onto the heart and apply another layer of glue over the top. For this project you will want the pattern to be perfect (not all mix match) So join the paper together to form the pattern (like wallpapering).
Tips… Only apply the glue to the area you wish to cover, instead gluing each section as you go therefore avoiding any areas starting to dry and becoming tacky.

20130206-003418.jpg

If you have small areas in need of covering, then patch them up with small strips of paper.

Now leave to dry.

Note. Decopatch Glossy Glue & Mod Podge (gloss) can both be used as a glue sealer and finish. Both glues dry clear and are both easy to use. I’m using mod podge as its much faster when drying.

4) Once dry add another layer of mod podge and leave it for around 20 minutes to dry.

20130206-003527.jpg

5) Once dry take the dark red ribbon and run it around the sides of your heart starting at the tip. Cut any excess ribbon and then use the mod podge to add the ribbon to the sides of the heart adding a layer of mod podge over the top of the ribbon too.

Leave to dry for 20 minutes or so.

20130206-003616.jpg

6) Once dry stick your self adhesive buttons to the front of your heart like so. Now place to one side.

20130206-003727.jpg

Now for the jar….

7) Bring forward your other half of Decopatch paper and wrap it around your jar. Start around 5 centimetres down from the neck of your jar so that the paper stops 3/4 of the way up leaving a small area unpapered. Only once you are sure its right add mod podge directly to the jar applying the paper as you go. (Apply the paper as a whole by rotating the glass, gluing and papering as you go). You will notice that you have a little excess paper at the bottom of your jar. Don’t worry! This will be removed soon. Now, add a top layer of mod podge over the top of the paper (ignoring the excess paper) and leave to dry for 20 minutes. Once dry add another top layer of mod podge and sit to dry for the same amount of time as before.

20130206-003836.jpg

8) Once your jar is papered and the mod podge is dry the paper will be stronger and look very glossy. Now use you scissors to remove any excess paper from the bottom of the jar as to tidy it up.

20130206-003953.jpg

9) apply mod podge around the top section of paper like a boarder. It only needs to be as thick as your thin red ribbon. Wrap the ribbon around the top of the paper and wipe any excess mod podge quickly with a sponge, to avoid it drying. Now apply mod podge over the top of the ribbon again wiping away excess as you go. Leave to dry for around 15 minutes.

20130206-004049.jpg

10) Now mix some mod podge with lots of the baby blue glitter. Apply this to the inner section of the jar that is still visible. Also apply some around the neck and top rim of your jar. The mod podge will dry clear leaving a crystallised glittery effect. Drying time is longer as the glue is thicker and no paper is applied. Mine took a few hours to dry fully.

20130206-004139.jpg

20130206-004304.jpg

11) once dry tie your blue ribbon around the neck of the jar into a pretty bow.

Dried Mod Podge Mixture

20130206-004352.jpg

20130206-004459.jpg

12) for the top section of the lid, place the lid face down on some heart Decopatch paper and with a pencil lightly draw around it. Once done carefully cut out the circle with a craft knife. Decopatch your cut out circle to the top of the jar again adding two top layers of mod podge to the top of the paper. Leave to dry for 20 minutes.

20130206-004704.jpg

13) Fill with Sweets or anything else you like (tea lights, makeup, pamper goodies, cookies) and fit lid.

Now just use some pretty tissue paper to wrap your heart and jar, place in a pretty gift bag ready to give as a gift.

20130206-004821.jpg

Fabric Flower Power Heart Magnet

You will need…

1 Large paper mâché heart magnet (Hobbycraft)

Some funky flower fabric (enough to cover heart) Mine is from eBay

Medium thick orange ribbon (Baker Ross)

3 Self adhesive buttons that coordinate with your fabric (I used red, yellow, baby blue) from Baker Ross

White acrylic paint

Mod podge

Tools…
2 brushes (for paint and mod podge)
Scissors
Craft Knife
Ruler

1) Paint heart in white paint as before.

20130206-004909.jpg

2) use a ruler and craft knife to cut fabric into two pieces one 3/4 in size and the other 1/4 in size. Use ruler to support fabric as you cut. Remove any frying.

3) cover 3/4 of your heart in mod podge placing the 3/4 piece of fabric on top at an angle so that only a 1/4 of the heart is left to cover. If fabric comes over the edges trim or just stick down as I have done. Add mod podge to both the heart and the top layer of fabric just as we did the decopatch paper.

4) Mod podge other 1/4 of heart and add the other half piece of fabric joining the pattern. Again add a coat of mod podge to the top layer of fabric working in the same way as the first piece. Leave to dry for around 20-30 minutes.

20130206-004948.jpg

5) Once dry add the ribbon to the sides of the heart as we did for our retro patterned heart above. Leave to dry for 10-15 minutes.

20130206-005028.jpg

6) Now stick on your three buttons like so and you’re heart magnet is set to go.

20130206-005100.jpg

20130206-005256.jpg

So… There you have it. Some fantastic Valentines handcrafted inspiration.

Have you made anything for Valentines Day?

20130207-225741.jpg

Shabby Chic Hand Painted Heart and Twinket Set

20130125-121546.jpg

Valentines day, another reason to get all creative and crafty!

Yes… I know we’ve only just done Christmas and New year but Valentines day is just weeks away and if you’re planning on handcrafting items for loved ones or creating valentines gifts with the kids then Now’s the time to get going… After all last minute is so not fashionable.

I’m actually hand decorating a paper mâché large hanging heart and matching small twinklet box for my bedroom dresser. Its actually not a valentines gift for anyone other than myself (if that counts) but this would make a lovely gift for that special day! Plus, it wouldn’t seem at all right to not share it with you guys.

I’ve made some beautiful heart twinklet boxes covered in pink rose Decopatch paper and posted them here on the blog last year. My initial plan was to cover both my heart and twinklet in shabby chic inspired Decopatch papers but I changed my mind at the last minute and decided to try something a little different.

I instead decided to paint my heart and twinklet with antique white and jet black acrylic paint. To give both heart and twinklet a really good finish I opted for Mod Podge gloss lustre as this would give it a great shine and strong protective seal.

What I Used…
Large Paper Mâché Hanging Heart
Small Embossed Paper Mâché Twinklet
Antique White Acrylic Paint
Jet Black Acrylic Paint
White Lace Paper Trimming
Mod Podge Gloss-Lustre-Lustre

Tools…
Medium size paint brush
Small brush (for detailing)
Sponge Applicator
Glue brush (for mod podge)
Scissors

What I did…

1: The first step was to use my medium size paint brush to cover both heart and twinklet in a coat of antique white paint. One coat isn’t enough, so leave items to dry then apply a second coat of paint. I found that this paint dried really quickly (30 minutes at the most) which was great as I had to work on one side at a time allowing drying in between.

20130125-034018.jpg

2: Once both coats have been applied and items are fully dried its time to add the detailing to both box and heart. I started with the heart twinklet box first. With the jet black paint and small paint brush I applied black paint to the embossed areas on the twinklet. This is a little tricky and fiddly as the embossed area is rather hard to see. I had to be careful not to overdo it but also decided to add additional pattern to make the design more bold and appealing. If you decide to do this, my tip would be, not to rush the process. Remember your applying extremely dark paint to a very light colour. Mistakes would mean a re-paint in the lighter colour and it would likely mean a number of coats to cover such mistakes.

20130125-034128.jpg

20130125-034230.jpg

3: While waiting for the twinklet to dry I started work on my heart. Again I used my jet black paint to add detail to the heart. The heart isn’t embossed yet I wanted to add the same type of design & effect as that on my twinklet as to create a matching set. With this I very carefully applied the paint to the heart doing my best to create a similar pattern as to that on the twinklet. As I had already needed to add extra pattern to the twinklet in a freestyle way, this actually wasn’t much different and therefore turned out to be easier than first expected! With this I was lucky to escape any mistakes that needed painting over.

I decided to apply the black painted design to half of the heart on each side. I felt this would look much better than covering the heart entirely in the pattern… Sometimes less is more! Note… If you would like to try this idea, you will need to first apply the pattern to one side of your heart, allow it to dry for at least 30 minutes, before turning over and painting the pattern on the opposite side.

20130125-034314.jpg

4: I then brought forward the lid of my twinklet box and hand painted a similar pattern around the lids edges. I then left the lid to dry for around 30 minutes or so.

20130125-034435.jpg

20130125-034539.jpg

5: I then took my dried twinklet lid and with my mod podge I applied my paper lace trimming around the edging of the Twinklets lid, as shown below. I used the Decopatch technique to apply the paper trimming and again left to dry for around 30 minutes.

20130125-034623.jpg

6: Once my twinklet was dry I painted the paper trimming in the same antique white paint (a second coat can be applied if desired)! I then left my twinklet lid to once again dry. (Good job this stuff is fast drying or I’d be here for months!)

20130125-034710.jpg

7: Once both items had there detail applied and were fully dried, it was time to apply the Mod Podge. First you must give the mod podge a good stir (remember a little mod podge goes a long way). I covered both my items in a coat of Mod Podge with my sponge as an applicator. Remember as this stuff dries it gets really tacky and you will need to be careful not to apply more stokes of mod podge as it dries or this will make your items look bumpy and untidy. More Mod Podge can be applied once the first coat is fully dried.

20130125-034754.jpg

8: Once the first coat of Mod Podge is dry (I’d give it an hour though it is likely to be touch dry much quicker) You can then apply a second coat. I applied my Mod Podge with a sponge as opposed to a brush because brush stokes can often be seen when using Mod Podge. A sponge looks more even and the end result is much better. Finally, I decided to leave it for a few hours to ensure my items were fully dry. Tip: To save time apply the Mod Podge to both sides of the heart and then dry by hanging your heart on a metal pole or similar! Just remember that your heart needs to have room to hang freely, not making contact with any other objects or surfaces as to allow it to evenly dry.

20130125-034841.jpg

9: To finish I tied some pretty white ribbon to the hanging loop of my heart and some foam to the inner section of my twinklet (i did this by using my twinklet lid as a template on some self adhesive foam).

So… here it is…

You can use other colours to create any look you desire. These colours work really well for me though I think something like a striking hot pink pattern against a black background would look pretty amazing. Note to tell self… “Create hot pink heart & black heart for daughters bedroom!”

These would also make perfect Valentines gifts. Maybe adding a piece of jewellery inside the twinklet or maybe a few homemade truffles… Yummy.

Thanks for reading and would love to know what you all think.

20130125-121519.jpg

Easy Personalised Art Work For Children’s Bedroom (Tutorial)

Sometimes you realise that a room could do with a bit of a cheer up. Not that you need to redecorate, painting the walls a new colour… Sometimes the addition of a little art work is all that’s needed to make a boring wall a magical one.

My daughters bedroom walls were looking a tad boring so with this in mind I decided to make some simple artwork to cheer it up a little

What I used to create this easy flower and butterfly picture.

Thick Card Square (measuring 30 by 23 centimetres)
Blue Metallic Acrylic Paint
Green Pic-Tixx 3D Glitter
3 Handcrafted Butterflies
5 Yellow Buttons
Pain & Glitter Flower Pre-Cut Shapes
Deco Pen (light green)
Glittered Card Letters
Mod Podge (clear gloss finish)

20130111-012110.jpg

Tools
Glue Dots
2 Medium Size Paint Brushes (for glue and paint)

Optional… Box Frame To Display Art

How to Make…

1) Paint your piece of card with the blue metallic paint. Leave to dry then paint a second coat.

20130111-012150.jpg

2) Once both coats have been applied and your card is fully dry, use your green deco paint pen to draw the flower stalks onto the card like so…

20130111-012244.jpg

3) Use the green Pic-Tixx pen to randomly add some sparkly leafs to the flower steams. Leave to dry for a least an hour.

20130111-012330.jpg

4) Once dry use glue dots to add the flower shapes to the ends of the flower steams. Layer these up and use the yellow buttons to finish of the bigger flowers. Be creative, mixing sizes and colours for different effects.

20130111-012414.jpg

20130111-012502.jpg

5) Once all your Flowers have been added use a thick brush to cover the picture in a layer of mod podge. Sponge around the flowers as glue tends to sit within these areas. Now leave to dry.

20130111-012547.jpg

20130111-012631.jpg

6) Once dry add your glittery letters along the bottom of your picture. Cover these in a thin layer of mod podge using a sponge. Leave to dry for 45 minutes.

20130111-012713.jpg

7) Once dry add glue dots to the backs of your 3 butterflies (2 each to the bodies). Add to your picture by pressing and holding down firmly.

20130111-012750.jpg

Add your picture to a frame, a box frame is best as it allows room for the butterflies.

Mine is yet to be placed in a frame but it looks pretty great wouldn’t you agree?

20130111-012836.jpg

Resources…
Handcrafted Butterflies (£1 pack of 4 from PoundLand)
Paint, Deco pen and Pic-Tixx (Baker Ross Ltd)
Mod Podge (Hobbycraft)
Flower Shapes (PoundLand)
Letters (eBay)